ESA in close collaboration with ArianeGroup and Arianespace has selected payloads which best fit the profile of the first mission of its new generation Ariane 6 launch vehicle from Europe's Spaceport in French Guiana.

This selection follows ESA's announcement of opportunity in November 2021, which offered a launch to low Earth orbit for experiments up to a total mass of 80 kg and release of payloads with a combined mass of up to 800 kg. They will be hosted on a 'mass dummy' featuring a large platform, inside the 14 m long version of the fairing on an Ariane 6 fitted with two strap-on boosters (A62 version).

This demonstration flight will contribute to the qualification of the Ariane 6 launch system as part of the transition from its highly reliable and successful predecessor, Ariane 5. This launch is an important step in the preparation for future institutional missions planned for Ariane 6, such as Galileo.

For this flight, ESA is responsible for operations from the launch campaign to the payload separation, and then disposal of the upper stage through burn-up during reentry.

"I'm glad that ESA can use the very first Ariane 6 flight as a platform for launching these fantastic payloads, some of which will enable European start-ups to validate their systems and provide future commercial services. The Ariane 6 inaugural launch is a key step towards full qualification of the Ariane 6 launch system," said Daniel Neuenschwander, ESA Director of Space Transportation.

Four experiments, ranging in mass from 0.15-12 kg, will be fixed to the platform on top of the mass dummy. These experiments will return valuable data up to the end of the mission when the upper stage reenters Earth's atmosphere.

ESA has also selected the candidate payloads listed below as part of the baseline for this Ariane 6 flight. Negotiations can now start for the corresponding launch service.

Two deployers will be arranged on board and will accommodate CubeSats. The RAMI deployer is built by Spain's UARX Space, and the ExoPOD is built by ExoLaunch in Germany.

With some spaces for CubeSats still available, ESA may add to this collection closer to launch.

Ariane 6 is a modular launch vehicle using two or four P120C strap-on boosters to achieve the required performance. The reignitable Vinci engine powers the upper stage which allows Ariane 6 to reach a range of orbits to deliver more payloads on a single launch. The upper stage engine will typically burn one, two or more times to reach the required orbits. After payload separation a final burn deorbits the upper stage to mitigate space debris.

Ariane 6 is a project managed and funded by the European Space Agency. ArianeGroup is design authority and industrial prime contractor for the launcher system. The French space agency CNES is prime contractor for the development of the Ariane 6 launch base at Europe's Spaceport in French Guiana. Arianespace is the launch service provider of Ariane 6.

Related Links
Ariane at ESA
Rocket Science News at Space-Travel.Com

Tweet

Arianespace to serve OneWeb's ambitions, will orbit 34 additional satellites with Soyuz
Evry, France (SPX) Feb 04, 2022
After the successful launch of NASA's Webb Space Telescope on December 25 with Ariane 5, Arianespace is back to the Guiana Space Center (CSG) with Soyuz for a February 10 lift-off. The first Arianespace mission of the year will orbit 34 additional OneWeb satellites. With this mission, Arianespace will exceed 100 satellites launched on Soyuz from the CSG, while OneWeb's fleet will be brought to 428 satellites on Low Earth Orbit. Scheduled for February 10 at 03:09 p.m. local time (06:09 p.m. UTC), A ... read more