include"/home2/www/vhosts/spacewar.com/swxphp/swxphp-start.php" ?>
NGC Begins Assembling First F-35 Production Jet![]() File image. |
The assembly process began March 24 at the company's Palmdale Manufacturing Center with the loading of an all-composite air inlet duct into a special tooling structure called a jig. This first assembly process, one of approximately 18 major steps in assembling an F-35 center fuselage, consists of attaching metal frames around the duct. The frames serve to brace and position the duct properly within the center fuselage.
"Jig loading the AF-6 center fuselage is significant because it shows the F-35 program is successfully transitioning from the system development and demonstration (SDD) phase into the production phase," said Janis Pamiljans, vice president and F-35 program manager for Northrop Grumman's Integrated Systems sector.
"Through a disciplined approach to managing costs and engineering changes, we've reduced our average center fuselage assembly time by approximately 28 percent since the SDD program began."
Community
Arlington VA (UPI) April 3, 2008 | The content herein, unless otherwise known to be public domain, are Copyright 1995-2007 - SpaceDaily.AFP and UPI Wire Stories are copyright Agence France-Presse and United Press International. ESA Portal Reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement,agreement or approval of any opinions, statements or information provided by SpaceDaily on any Web page published or hosted by SpaceDaily. Privacy Statement |